MP32 is the most compact ECU and it is perfect for installation in small spaces. Furthermore, it has a very good quality/price ratio.
MP32 uses a 32-PIN automotive connector and requires a minimum number of connections to sensors and actuators: for this reason, its installation is much simpler comparing to other ECUs.
MP32 ECU is designed for 3-4 cylinders multipoint timed sequential injection engines. While running on gas, the MP32 ECU, according to fuel injection time, gas temperature and gas pressure, calculates the gas quantity to be injected in gaseous form in the intake manifold for replicating the performance of the engine running on petrol MP32 is equipped with a diagnosis system on every Gas component, which is monitored by the calibration software during the installation of the system and all along the engine lifetime. The diagnosis ensures avoiding potential malfunctioning problems and makes technical interventions easier. In addition, the calibration tool offers guided procedures for simplifying the system installation and setting.
MP32 is equipped with a 32-PIN new generation automotive connector, with an IP high protection degree (6K9K) against water infiltrations and an easy leverage system for cable connection/disconnection. The cable is characterized by a security system on the connector that prevents accidental release of the wiring.
✓ Supply voltage: Vbatt=10÷16V
✓ Operating temperature: -40÷110°C
✓ Current absorption with the actuators disabled: Imax ≤0.5A
✓ Current absorption in standby mode: Istandby ≤10mA
✓ up to 4 injectors with the following characteristics Imax=6, Vbatt,max=16V
✓ 2 power outputs for gas solenoid valves:
*Pmax=25W, Imax=2A (power and maximum current for each output with two outputs enabled)
*Pmax=50W, Imax=4A (power and maximum current with just one output enabled)
✓ Gas pressure sensor: AEB025, 463500000, 463059000, 463505000
✓ MAP sensor: AEB025, original
✓ Water temperature sensor: 4K7, Original
✓ Gas level sensor: AEB, o-90Ω, non-standard, non-standard inverted
Management of AEB119B type switch
✓ Control unit
✓ Switch with push button
✓ Gas pressure integrated sensor + MAP
✓ Bag of accessories for harnesses